招聘数控编程员 CNC programmer维布络基础设施工程机械（常州）有限公司

发布日期：2014-09-12 13:59:33浏览次数：16533

薪资待遇：面议 工作地区：常州市
工作性质：全职  招聘人数：1人
住宿提供：提供工作 工作经验：3年以上
学历要求：不限
职位描述
[主要职责] (Key Responsibility)：
1.Create sequence of operations for a CNC machine based on Drawings,  Process
   sheets and other related documents
2.Write and modify CNC Machine Program and test for completeness
3.Set the CNC machine to achieve the desired product quality
4.Troubleshoot, correct and certify the CNC Program and maintain.
5.Set parameters in the program to achieve the desired results on the product
6.Create machine instructions and process instructions for CN operations
  depending on preceding and post operations
7.Plan and install necessary tools, fixtures, clamps, rests, centres, etc for
  the CNC machine

[要求] (Requirements)
        Familiar with any CNC system ( Fanuc, Siemens or other similar system),
    skilled to operate and create , modify CNC programs, as required

      At least 3 years experience on CNC Turning Center/ Milling Centre.

      Able to read Drawings, Translate drawings into Program steps .
      Graduation in Engineering, specialization in CNC programs / machines

      Able to handle measuring Instruments and make qualitative measurements

      Analytical ability and problem solving ability

      A good team player

Desirable: Knowledge of English
联系人：HR
联系电话：0519- 8119 2000
联系传真：0519-81192006
单位地址：武进大道西路86号武建工业园9A/9B 数控培训,数控车床培训,加工中心培训
您要了解更多，请访问常州兰生数控职业技术培训学校网站：www.cnc-school.com   ，咨询电话：0519-83404177，客服QQ：1694491771、1765142146。

本文仅代表作者观点，不代表本站立场。
本文系作者授权发表，未经许可，不得转载。
来源：常州市兰生职业培训学校
本文地址：https://www.cnc-school.com/article_1144.htm